HUSKY DAYS Freeride in-line skates VIBER 110
The VIBER 110 roller skates combine a freestyle hard shoe with the speed of large 110mm wheels. A special universal model designed both for shorter routes in the city and thanks to large wheels also for trails. This skate is suitable for advanced and experienced skaters.
По поръчка - продуктът не е наличен и може да бъде доставен до 7-14 дни
Изчерпан - продуктът е изчерпан и не е достъпен за поръчка към момента
Вземи желания продукт сега, избери подходяща за теб схема на изплащане:
Искаш тази покупка сега, получаваш я веднага!
Купи стоки за сума от 40 до 400 лв., плати с 2 вноски, с 0% лихви и 0лв. такси.
По време на покупката плащаш само 25% от стойността и, а останалите 75% в рамките на следващите 30 дни изцяло онлайн.
Толкова е лесно!
Стъпка 1: Попълваш основни лични данни и нищо повече – име, телефон, ЕГН, имейл, адрес ,номер на лична карта.
Стъпка 2: Ценим времето ти и сме бързи – отговорът на заявката си получаваш до минути.
Стъпка 3: Минаваш през онлайн идентификация. Нищо страшно – изпращаш ни снимки на личната си карта от двете и страни и твое селфи.
Стъпка 4: Попълваш още малко данни - този път на личната ти кредитна/дебитна карта, чрез която ще се извърши автоматично погасяване на вноските ти. Бъди спокоен, данните ти са защитени и се съхраняват прилежно от лицензирания доставчик на платежни услуги Paynetics.
Стъпка 5: На финала сме - Подписваш договора в защитена платформа изцяло онлайн.
Сега ти си на ход!
Поръчай и вземи сега, плати на 4 равни вноски!
Пазарувай за сума от 40 до 400 лв. - без лихви, без такси, без напрежение.
Плати 25% от стойността на поръчката веднага, а останалите 75% в рамките на 3 месеца на равни вноски.
Изплащането става автоматично, без усилия от твоя страна!
Просто опитай!
Лесно е:
Стъпка 1: Попълваш основни лични данни и нищо повече – име, телефон, ЕГН, имейл, адрес ,номер на лична карта.
Стъпка 2: Ценим времето ти и сме бързи – отговорът на заявката си получаваш до минути.
Стъпка 3: Минаваш през онлайн идентификация. Нищо страшно – изпращаш ни снимки на личната си карта от двете и страни и твое селфи.
Стъпка 4: Попълваш още малко данни - този път на личната ти кредитна/дебитна карта, чрез която ще се извърши автоматично погасяване на вноските ти. Бъди спокоен, данните ти са защитени и се съхраняват прилежно от лицензирания доставчик на платежни услуги Paynetics.
Стъпка 5: На финала сме - Подписваш договора в защитена платформа изцяло онлайн.
Сега ти си на ход!
Не е нужно да избираш, може да имаш всичко!
Купи на равни вноски стоки от 100 до 30000 лв., избери най-подходящата за теб вноска.
С TBI Pay, пазаруването е лесно, гъвкаво и напълно онлайн.
Контролът е в твоите ръце, не чакай.
Пазарувай!
|
|
- Chassis mounting dimensions: 165mm
- Bearings: quality ABEC-9 chrome with rubber duster for easy cleaning and maintenance
- Wheels: PUC, SUPER HI-REBOUND 85A 110*24 mm
- Size: 37- 45
- Recommended use: Sport and aggressive skating, advanced, experienced and competition skaters.
- Category: Urban
- Shell: Sport street (urban) and freestyle ride, beginners, advanced and experienced riders.
- Inner material: Fine Nylon, absorbent microfiber
- Chassis: CNC construction extra reinforced, one piece, transversely and longitudinally adjustable
- Wheel type: SPRING
- Diameter of the wheel: 110 mm
- Wheel hardness: 85A
- Bearings: ABEC 9 chrome steel + rubber washer
- Brake: Yes
- Fastening system: Special antislip laces
The skate with a hard skeleton is designed for universal use due to its construction and equipment. Thanks to the short chassis is ensured easy maneuverability. The skate is equipped with a combination of three wheels with a size of 110mm, thanks to which it is possible to achieve high speeds when riding. It is also possible to mount smaller wheels in the chassis (minimum recommended size 90mm).
The skeleton of the skate is well ventilated - ventilation reaches the foot thanks to a ventilated liner, which contains holes around its entire circumference, including the tongue. A screw with a special nut and washer is used in the skate joint, thanks to which the cuff is replaceable and can be tightened if necessary, it also guarantees a longer service life than the articulated rivet. The upper metal self-locking buckle has a bend at the end for a better grip. The strap is inserted into the skeleton so that it does not catch on the second skate during slalom and freestyle, the buckle itself is protected against damage by the lower plastic boss. The instep strap is equipped with a single-stage micro buckle with very comfortable tightening and loosening thanks to the ratchet system.
The plastic protectors on the outside of the skates are replaceable, as is the instep strap. The holes for the laces are fitted with strong metal rings for the protection of the laces and better tightening. Thanks to the use of waxed laces with a width of 10 mm, it is possible to tighten the laces gradually and to close the skeleton of the skate more effectively.
The skate liner is ventilated, has holes around its entire circumference and reinforced with PVC at the top. There is an elastic neoprene in the area of the fingers to increase comfort. In the back, there is a loop with a reflective strip. Reflective parts are also added on the outside of the skate. In the area of the Achilles tendon, the liner is lowered and shaped into a V-shape, which enhances manoeuvrability and mobility, and thus easier execution of freestyle tricks and moves. The liner has cut-outs in the area of the ankle bend sewn with elastic neoprene, which achieves optimal anatomical dispositions of the liner while maintaining its rigidity. The lower part of the liner uses a material that slides less in the skeleton. The shoe has an anatomical insole with a thickness of 3mm, which is comfortable enough, yet not too soft.
Under the liner in the heel part, the shock-absorbing silent block made of TPR material, which perfectly absorbs vibrations and shocks, is fairly thick, soft and comfortable.
The tongue of the liner is sufficiently stiff and thick, it consists of 2 parts, so it perfectly copies the instep of the foot. The tongue holds the position well thanks to the use of a drawstring.
The chassis made by CNC is strongly reinforced with a three-dimensional structure, very strong, stable and precise. The chassis is attached to the shoe with 2 central bolts and 2 robust aluminium blocks with threads. Thanks to these blocks, the transmission of power is significantly more efficient. The chassis can be adjusted transversely and longitudinally. The hollow axles for weight reduction have a diameter of 8mm and are mounted on the left skate on the inside and on the right skate on the outside to prevent the screws from loosening while riding.
The length of the innersole:
- Size: 37 - 23.6cm
- Size: 38 - 24.5 cm
- Size: 39 - 25.2cm
- Size: 40 - 25.9cm
- Size: 41 - 26.6cm
- Size: 42 - 27.6cm
- Size: 43 - 28.3cm
- Size: 44 - 29.0cm
- Size: 45 - 29,7cm
Delivery to Bulgaria is made in 1 working day by the courier company Econt or Speedy, after we contact you by phone for order confirmation.
| Delivery to Sofia, Bul. Dondukov 42 Extreme sport shops | Free |
| Delivery to office Econt/Speedy for orders over 99,99 BGN/ to Econt/Speedy automat | Free |
| Delivery to Econt/Speedy automat for orders up to 99,99 BGN | 3,90 BGN fixed price |
| Delivery to Econt/Speedy office for orders up to 99,99 BGN | 5,90 BGN fixed price |
| Delivery to address with Econt/Speedy for orders up to 99,99 BGN | 7,90 BGN fixed price |
You can read more information about the terms of delivery here.
International delivery is made with Bulgarian Post, DPD, EMS, Econt. The delivery price depends on the weight of the order and the courier you choose.
Delivery time depends on the chosen courier.
In our online store we offer options for product replacement, product return and complaint in case of defect:
| Product replacement | To replace a product, first you must return the product you received packaged and in a good commercial condition. You should pay for the transport cost of returning. If there is a difference in the value you have paid, we will refund the overpaid amount by bank transfer or you will pay the difference. |
| Product return | You can return a product within 30 days of receiving the order. Send the product together with a completed form - electronic or paper. Write a name, a phone and the number of order. You need to pack the parcel well. The products must not show any signs of use or have a damaged commercial appearance. The returned products must be in their original packaging, as well as with the labels and accessories attached to them. The customer pays for the returning. Refunds are made within 14 working days from the date of receipt of the returned shipment on a bank account. |
| Compliant | A defective product which is in warranty period should be returned in clean condition, with a warranty card inluded, if possible in a package. In case of factory defect, the item will be repaired within 10 working days. Replacement of the item is possible in case of irreparable defect. |
You can read more information about the conditions here.
- Chassis mounting dimensions: 165mm
- Bearings: quality ABEC-9 chrome with rubber duster for easy cleaning and maintenance
- Wheels: PUC, SUPER HI-REBOUND 85A 110*24 mm
- Size: 37- 45
- Recommended use: Sport and aggressive skating, advanced, experienced and competition skaters.
- Category: Urban
- Shell: Sport street (urban) and freestyle ride, beginners, advanced and experienced riders.
- Inner material: Fine Nylon, absorbent microfiber
- Chassis: CNC construction extra reinforced, one piece, transversely and longitudinally adjustable
- Wheel type: SPRING
- Diameter of the wheel: 110 mm
- Wheel hardness: 85A
- Bearings: ABEC 9 chrome steel + rubber washer
- Brake: Yes
- Fastening system: Special antislip laces
The skate with a hard skeleton is designed for universal use due to its construction and equipment. Thanks to the short chassis is ensured easy maneuverability. The skate is equipped with a combination of three wheels with a size of 110mm, thanks to which it is possible to achieve high speeds when riding. It is also possible to mount smaller wheels in the chassis (minimum recommended size 90mm).
The skeleton of the skate is well ventilated - ventilation reaches the foot thanks to a ventilated liner, which contains holes around its entire circumference, including the tongue. A screw with a special nut and washer is used in the skate joint, thanks to which the cuff is replaceable and can be tightened if necessary, it also guarantees a longer service life than the articulated rivet. The upper metal self-locking buckle has a bend at the end for a better grip. The strap is inserted into the skeleton so that it does not catch on the second skate during slalom and freestyle, the buckle itself is protected against damage by the lower plastic boss. The instep strap is equipped with a single-stage micro buckle with very comfortable tightening and loosening thanks to the ratchet system.
The plastic protectors on the outside of the skates are replaceable, as is the instep strap. The holes for the laces are fitted with strong metal rings for the protection of the laces and better tightening. Thanks to the use of waxed laces with a width of 10 mm, it is possible to tighten the laces gradually and to close the skeleton of the skate more effectively.
The skate liner is ventilated, has holes around its entire circumference and reinforced with PVC at the top. There is an elastic neoprene in the area of the fingers to increase comfort. In the back, there is a loop with a reflective strip. Reflective parts are also added on the outside of the skate. In the area of the Achilles tendon, the liner is lowered and shaped into a V-shape, which enhances manoeuvrability and mobility, and thus easier execution of freestyle tricks and moves. The liner has cut-outs in the area of the ankle bend sewn with elastic neoprene, which achieves optimal anatomical dispositions of the liner while maintaining its rigidity. The lower part of the liner uses a material that slides less in the skeleton. The shoe has an anatomical insole with a thickness of 3mm, which is comfortable enough, yet not too soft.
Under the liner in the heel part, the shock-absorbing silent block made of TPR material, which perfectly absorbs vibrations and shocks, is fairly thick, soft and comfortable.
The tongue of the liner is sufficiently stiff and thick, it consists of 2 parts, so it perfectly copies the instep of the foot. The tongue holds the position well thanks to the use of a drawstring.
The chassis made by CNC is strongly reinforced with a three-dimensional structure, very strong, stable and precise. The chassis is attached to the shoe with 2 central bolts and 2 robust aluminium blocks with threads. Thanks to these blocks, the transmission of power is significantly more efficient. The chassis can be adjusted transversely and longitudinally. The hollow axles for weight reduction have a diameter of 8mm and are mounted on the left skate on the inside and on the right skate on the outside to prevent the screws from loosening while riding.
The length of the innersole:
- Size: 37 - 23.6cm
- Size: 38 - 24.5 cm
- Size: 39 - 25.2cm
- Size: 40 - 25.9cm
- Size: 41 - 26.6cm
- Size: 42 - 27.6cm
- Size: 43 - 28.3cm
- Size: 44 - 29.0cm
- Size: 45 - 29,7cm
Delivery to Bulgaria is made in 1 working day by the courier company Econt or Speedy, after we contact you by phone for order confirmation.
| Delivery to Sofia, Bul. Dondukov 42 Extreme sport shops | Free |
| Delivery to office Econt/Speedy for orders over 99,99 BGN/ to Econt/Speedy automat | Free |
| Delivery to Econt/Speedy automat for orders up to 99,99 BGN | 3,90 BGN fixed price |
| Delivery to Econt/Speedy office for orders up to 99,99 BGN | 5,90 BGN fixed price |
| Delivery to address with Econt/Speedy for orders up to 99,99 BGN | 7,90 BGN fixed price |
You can read more information about the terms of delivery here.
International delivery is made with Bulgarian Post, DPD, EMS, Econt. The delivery price depends on the weight of the order and the courier you choose.
Delivery time depends on the chosen courier.
In our online store we offer options for product replacement, product return and complaint in case of defect:
| Product replacement | To replace a product, first you must return the product you received packaged and in a good commercial condition. You should pay for the transport cost of returning. If there is a difference in the value you have paid, we will refund the overpaid amount by bank transfer or you will pay the difference. |
| Product return | You can return a product within 30 days of receiving the order. Send the product together with a completed form - electronic or paper. Write a name, a phone and the number of order. You need to pack the parcel well. The products must not show any signs of use or have a damaged commercial appearance. The returned products must be in their original packaging, as well as with the labels and accessories attached to them. The customer pays for the returning. Refunds are made within 14 working days from the date of receipt of the returned shipment on a bank account. |
| Compliant | A defective product which is in warranty period should be returned in clean condition, with a warranty card inluded, if possible in a package. In case of factory defect, the item will be repaired within 10 working days. Replacement of the item is possible in case of irreparable defect. |
You can read more information about the conditions here.
